Why Buy our Patio Heaters?
Patio Heaters Take Many Forms – Which One Should you Get?
Patio heaters are the only way to provide warmth, and the best way of increasing comfort for outdoor social areas of any size. But there are many variables involved in creating this inviting setting. Both the effectiveness and the cost of heating an outdoor space greatly depend upon the type of heater selected, and the way it's designed.
Overhead style gas or propane radiant infrared heaters give the best result AND the greatest value. They offer the most area coverage, most heat, most efficient energy usage, and the most economical operating cost available.
To ensure a clear, detailed understanding of these factors, we'll first discuss how our overhead patio heaters operate and then outline the various other options on the market.
Our patio heaters use infrared energy to heat the objects beneath them, and the heat generates evenly and spreads uniformly over radiating surfaces. Gas or propane powered units have a high BTU output and quality reflectors directing the heat waves over a large area with very little loss compared to mushroom heaters. Therefore generating more heat for less fuel. Our heaters are overhead or wall mounted, taking up zero floor space. Our models do not produce any visible light as they emit pure heat, efficiently converting gas or propane to infrared heat.
Our heaters have the following features:
- Variable heat settings (Patent Pending):
Our unit is the only product on the market with full, variable heat output capability which allows you to set the amount of heat desired for your particular guests on a given day. Most competitors have only a single input model with a few offering a two–stage, hi or low model that do not match the performance of a our patio heaters. Imagine, having a stove in your kitchen with only one or two heat settings. Our heaters allow you to have the ability to adapt to all seasons and comfort levels at the turn of a dial.
- Lowest clearance to combustible requirements in the industry
- Inputs from 40,000 to 75,000 BTUs per hour (Largest on the market!)
- Easy to operate, just flick a switch, no pilot lights!
- Three–try Direct Spark Ignition system, with 100% safety shut off
- Sleek, architectural design, various lengths and configurations available
- Available in natural gas or propane
- Heavy–duty professional grade construction
- Eight–sided aluminum or stainless steel reflector
- Virtually maintenance free
- Certified to –40F weather conditions
- Wind and weather proof enclosed burner chamber
- Effective in snow and ice melt applications
- CSA Safety certified for both residential and commercial applications.
Our heaters are a great choice because they are one of the very few heaters manufactured in Canada has a clean-lined, unobtrusive design, and directional high heat output. It is a permanently installed heater which can connect to large capacity refillable gas cylinders, or connect directly into a natural gas distribution system. Our exclusive, remote control panel may be put anywhere, within easy reach. The heat control is amazingly fine and accurate, compared to other units that only have basic settings. The overall craftsmanship and quality of the design is very impressive.
With a better understanding of the operation and features of the various types of patio heaters, you'll be able to make a smarter purchasing decision, based on your needs and expectations.
Standing gas patio heaters, as a general rule, have a capacity of 40,000 BTU, stand six or seven feet tall, and have shallow overhead domes that attempt to direct heat downward in a 360 degree radius (often referred to as “mushroom” or “umbrella” heaters). Propane models have a 20 pound gas tank which is enclosed at the base. 40,000 BTU will only effectively radiate heat over a circle about 8 to 10 feet in diameter, with the greatest amount of heat directly underneath within approximately 3 to 4 feet of the heater. A significant amount of heat is lost at the outer edges, resulting in only marginal heat effectiveness at the perimeter.
Drawbacks: These heaters take up a large amount of may not be aesthetically pleasing, require substantial clearance from combustible materials, may need to be frequently replaced, and will leave cold spots in large areas. Standing gas heaters have less coverage per BTU capacity than other forms of patio heaters. Some cities have banned the use of propane models due to safety concerns.
3) Table Patio Heaters
The most portable and least expensive table heaters are propane table heaters. Typically using small one or two pound gas cylinders, some units may offer a connection to larger, refillable cylinders. Maximum heat is typically 9,000 to 11,000 BTU that is equal in heat output to a 1500 watt electric heater. The dome reflector radiates heat within a 4 to 5 foot diameter.
Drawbacks: Very limited coverage due to their small size, the overall long-term reliability of the unit, and poor safety. Not effective in cold weather.
4) Electric Patio Heaters
Electric patio heaters produce limited heat, quickly, and are relatively easy to install.
5) Fire Pits
Fire pits and outdoor fireplaces are aesthetically pleasing and provide a focal point for guests to gather near. However heating capability is limited if they are being depended upon to warm up a crowd on a cold night, they are difficult to regulate, and create safety hazards.
There are three basic types of fire pits:
- Circular fire pits radiate minimal heat in all directions. Most have legs and a fire screen. Flame and smoke is vulnerable to wind and may be blown back on people, decks, and homes.
- Chimineas are shaped like pot-bellied stoves, and a short chimney helps divert smoke away from people. A small opening directs heat in just one direction. It does not have the same visual impact that an open flame fire does.
- Outdoor fireplaces usually have a chimney, but the term is often used to describe any fire pit with legs, and some may even look like an indoor fireplace.
Drawbacks: All outdoor fire pits are primarily used to set a “mood” rather than for practical heating purposes since greatest coverage is typically less than ten feet. Fire pits are not designed for use on wooden decks and should only be used on masonry surfaces.